loading spinner

WhitePeaks

WhitePeaks

Active filters

  • Copran® Zri | Copran® Zri...

    €93.85

    Classic Zirconia Blank with highest bending strength (1400 MPa) for bridges with up to 14 pontics

  • Copran® Zri | Copran® Zri...

    €93.85

    Classic zirconia with highest bending strength (1400 MPa) for bridges with up to 14 pontics

  • CopraSupreme | CopraSupreme...

    €109.23

    The new HT zirconia with increased translucency and high bending strength (about 1100 Mpa) for copings and fully anatomical restorations for up to 14 units. Isostatically pressed with a lifetime warranty

  • CopraSintec Evo K

    €130.00

    World´s first “middle-soft” milling of Co/Cr in 98mm – wet or dry! The blank is pre-sintered, so most delicate structures and minimal wall thicknesses can be realized. The blank does not contain binder anymore, so the sintering time is greatly reduced, resulting in less argon gas consumption. Also manufactured in isostatic high pressure process, same indications as the softer CopraSintec K. Very small wear of burs.

  • TA-Plex

    €20.00

    Ivory

    PMMA Blank for the casting technology

  • CopraSupreme Symphony

    €127.14

    9-layer (5 layers plus 4 transition layers), tanslucent zirconia with high translucency and higher bending strength (about 1100 Mpa) for copings and fully anatomical restorations for up to 14 units. In the production process, 5 layers of pre-coloured zirconia are layered on top of each other, building 4 transition layers in the process. The result is an extremely natural colour transition for vivid, lively restorations.

  • CopraTemp Symphony

    €58.57

    PMMA of pre-coloured polymethylacrylate, 5-layers for high aesthetic demands.Suitable for the fabrication of crowns and bridges, that serve as provisional or longterm dental prosthesis. CopraTemp Symphony is also suitable for permanent restorations. It is extremely plaque resistant and can be layered with resins and composites and can be individualised. The result of the 5 layers is an extremely natural colour transition for vivid, lively restorations.

  • TA-Wood Blank

    €25.71

    Bubinga Rosenwood

    (Guibourtia tessmannii)

    Bubinga is a beautiful exotic wood species with a variety of exciting veins and striking red, brown and purple tones.

    The slightly wavy stripes of the  beautiful texture of this African rosewood are caused by alternating rotation, narrow color zones or lively veining.

  • CopraSmile | CopraSmile...

    €109.23

    Cubic, isostatically pressed zirconia with highest translucency for anterior- or posterior restorations with up to 3 units. Bending strength about 600 Mpa

  • TA-Space Wood PMMA wood blank

    €35.71

    PMMA stabilised coloured wood. The special aesthetic porosity of the wood leades to holes during milling which can be filled after milling. Larger holes are filled with a mixture of wood dust (milling dust or sand paper made dust) and clear acrylic (PMMA clear and monomer), smaller porosities are filled with wood dust and superglue (cyanoacrylate).

    The product can be finished like PMMA and is available in the seven colours: clear nature, pitch black (black), green-yellow, clear blue (blue), red yellow,  turquoise green, clear red (red-brown).

  • CopraSintec K

    €122.86

    Soft as wax milling of Co/Cr – wet or dry! The isostatic high pressure manufacturing process allows bridges with up to 14 units and even implant bar restorations. Non precious metal alloy type 4, therefore no limitations compared to milled or cast Co/Cr alloys. The small shrinkage allows you to place up to 40 units in a blank. Minimal wear of burs.

  • CopraPeek

    €121.54

    Light / Medium / Rose / Bio Classic

    The very high biocompatibility of this high tech resin makes it the first choice for prosthetic bases, primary-, secondary- and tertiary constructions, metal free supra-structures as well as crown and bridge restorations. CopraPeek provides best comfort for the patient due to its minimal weight and extreme low thermal conductivity. Available in dentin A2 like shade “Medium”, “Light” grey, gum shade “Rose” and natural/not coloured “Bio Classic. CopraPeek is very plaque resistant, non-allergenic and tasteless.