loading spinner

Handpiece accessories

Active filters

  • Q motor with ISO coupling...

    €793.00

    The motor with ISO connection allows the use of dental handpieces and angle pieces on the powerful Schick control units.

    Both handpieces and angled handpieces can be placed with or without optical fibers.

    Control units

    The ISO-motor is suitable for all Schick control units as well as the C controls via adapter cable.

  • Foot switch on/off

    €128.00

    Foot switch on/off

    To start the motor with a pre-selected rpm.

    Connectable to all QUBE, QUBE II, Q Profi and Q Basic table top control units.

  • Riveting hammer QUBE

    €257.00

    Universal and flexible

    It is ideally suited for the detachment of telescopes and cones, as well as broken attachment parts.

    Due to the oscillations generated in the attachment part, the primary part and the secondary part can be separated without damaging the sensitive edge zone.

    Your benefits

    • Quick and easy to handle
    • Robust construction
    • Tempered ram, will not distort
    • Lifetime-lubricated ball bearing
    • For 2.35 mm diameter chucks
    • To be used with nearly all micromotors

     

    See user video on:

    www.schick-dental.de/rivetinghammer

  • Handpiece for left hand use

    €1,077.00

    Working without limitation

    With the specially developed laboratory handpiece for the left-handed Schick Dental is demonstrating once again its innovation power.

    Due to of the special left-handed settings enormous power with no limits in overspeed are available.

    In addition, the direction of rotation is changed to counterclockwise rotation due to the special motor cable. Accordingly, the anti-clockwise handpiece can be easily operated on all controllers.

    The special Soft-Grip surface and the smooth operation are additional plus points.

    Control units

    You can attach this laboratory handpiece for the left-handed to all recent Schick control units. Please take care that you are using only the appropriate special left-handed tools and burs.

    Note: If the handpiece 9200/08 is operated on a control unit with left / right-hand switching, then it must be left in clockwise (righthand) direction since the direction of rotation

    Scope of delivery:

    handpiece with cable, chuck key, counterstay wrench 

  • Dynamic foot control

    €195.00

    Variable speed control of the handpiece.

    Maximum speed adjustable at the control unit.

    Connectable to all QUBE, QUBE II, Q Profi and Q Basic table top control units.

  • Riveting hammer

    €257.00

    Universal and flexible

    It is ideally suited for the detachment of telescopes and cones, as well as broken attachment parts.

    Due to the oscillations generated in the attachment part, the primary part and the secondary part can be separated without damaging the sensitive edge zone.

    Your benefits

    • Quick and easy to handle
    • Robust construction
    • Tempered ram, will not distort
    • Lifetime-lubricated ball bearing
    • For 2.35 mm diameter chucks
    • To be used with nearly all micromotors

     

    See user video on:

    www.schick-dental.de/rivetinghammer

  • Riveting hammer with chisel

    €257.00

    Universal and flexible

    It is ideally suited for the detachment of telescopes and cones, as well as broken attachment parts.

    Due to the oscillations generated in the attachment part, the primary part and the secondary part can be separated without damaging the sensitive edge zone.

    Your benefits

    • Quick and easy to handle
    • Robust construction
    • Tempered ram, will not distort
    • Lifetime-lubricated ball bearing
    • For 2.35 mm diameter chucks
    • To be used with nearly all micromotors

     

    See user video on:

    www.schick-dental.de/rivetinghammer

  • Twin-riveting hammer

    €299.00

    Universal and flexible

    It is ideally suited for the detachment of telescopes and cones, as well as broken attachment parts.

    Due to the oscillations generated in the attachment part, the primary part and the secondary part can be separated without damaging the sensitive edge zone.

    Your benefits

    • Quick and easy to handle
    • Robust construction
    • Tempered ram, will not distort
    • Lifetime-lubricated ball bearing
    • For 2.35 mm diameter chucks
    • To be used with nearly all micromotors

     

    See user video on:

    www.schick-dental.de/rivetinghammer