Model saw G2 cpl
€3,077.00
Tax included
Exact and time saving
Until now, on many models, saw cuts had to be made manually by virtue of the small space between the preparation or the diverging alignment of the teeth.
In addition to the increased risk of injury, this mode of operation also entails an increased risk of damage to the plaster model and is also very time-consuming.
Save time and money
G2 Concept model saw
90 seconds *
Sawing by hand
180 seconds *
* Determined in the practice test on a model with 11 segments or 10 saw cuts.
See user video on:
www.schick-dental.de/g2comparison
Working method
The model to be sawn is placed on the saw table and fixed with two hands.The integrated line laser allows precise positioning of the cut.
When lowering the saw table, the saw blade plunges into the model from below and sets a clean cut parallel to the pins.
The exact depth of cut can now be determined optically perfectly, since when the teeth are diverging, the saw is sawn to the preparation limit and broken by hand at the intended break site.
Since the saw cuts are parallel to each other, all model segments can be easily removed from the model.
See user video on:
www.schick-dental.de/g2code-en
Special diamond saw blade - developed for long lasting high precise and thin saw cuts.
Scope of delivery
G2 Concept model saw with integrated line-marking laser, mains cable, diamond saw blade.
Technical data
| Speed | 7.500 rpm |
| Diamond saw blade | ø 85 x 20 mm segmented |
| Width of cut | 0.3 mm |
| Cutting depth max. | 26.5 mm |
| Laser category | 3R |
| Suction support | Ø 38 mm |
| Operating voltage | 230 V / 115 V / 100 V |
| Operating frequency | 50 / 60 Hz |
| Input capacity | 130 Watt |
| Width x Height x Depth | 375 mm x 160 mm x 390 mm |
| Weight | 4.5 kg |
1500/5
Comments (0)
No customer reviews for the moment.
Exact and time saving
Until now, on many models, saw cuts had to be made manually by virtue of the small space between the preparation or the diverging alignment of the teeth.
In addition to the increased risk of injury, this mode of operation also entails an increased risk of damage to the plaster model and is also very time-consuming.
Save time and money
G2 Concept model saw
90 seconds *
Sawing by hand
180 seconds *
* Determined in the practice test on a model with 11 segments or 10 saw cuts.
See user video on:
www.schick-dental.de/g2comparison
Working method
The model to be sawn is placed on the saw table and fixed with two hands.The integrated line laser allows precise positioning of the cut.
When lowering the saw table, the saw blade plunges into the model from below and sets a clean cut parallel to the pins.
The exact depth of cut can now be determined optically perfectly, since when the teeth are diverging, the saw is sawn to the preparation limit and broken by hand at the intended break site.
Since the saw cuts are parallel to each other, all model segments can be easily removed from the model.
See user video on:
www.schick-dental.de/g2code-en
Special diamond saw blade - developed for long lasting high precise and thin saw cuts.
Scope of delivery
G2 Concept model saw with integrated line-marking laser, mains cable, diamond saw blade.
